Monitoring equipment installed in the home is no surprise, but one thing is a lot of people ignored, is about the layout of the cameras, many people believe that the outside of the home, most at home with a camera can be finished, but it is not so simple.
What is a good spacing monitoring layout?
We might as well look at the extensive experience of chengdu monitoring and installation in the installation of monitoring equipment for others, how to layout household monitoring.
The monitoring and installation in chengdu believes that there are three points of attention in the layout of household monitoring.
First, in the living room, room to install the home network camera, the installation position should be in some corner.
In this corner, you should be able to see the entrance and most of the interior.
At the time of installation, the network camera should be able to rotate in a vertical direction.
Second, the focus of the household monitoring layout is the installation of the alarm probe.
The detectors include door magnets, infrared detectors, smoke detectors, gas detectors and so on, and can be connected to a network camera alarm interface.
In this way, when you encounter a police situation, you can call the alarm and send a text message to the host.
Third, implement remote video monitoring installation.
The network camera can access the home router with wireless or wired network, and then access the broadband network through the router, and the video legend will be connected to the public network, which is monitored by video.
It is often necessary to apply for a domain name and bind the domain name to the router so that you can remotely access the family's video image and save video and pictures in the matching VCRS.
Of course, finally, it is the company with good reputation to install, because it will determine whether the installation is professional enough, and it also determines whether they can provide good after-sales service.
How To Set Up Your Security Camera And Arrange The Positions
Installing security cameras in your home is an excellent way of ensuring that you and your family are safe and that your property is protected. However, it is essential to make sure that you install the cameras in the right locations and set them up correctly to maximize their performance. Here are some tips on how to set up your security camera and arrange their positions:
1. Determine the areas you want to monitor
The first step in installing security cameras is to determine which areas of your home need monitoring. You should identify the entry and exit points, high-traffic areas, and blind spots where an intruder may try to break in. For outside cameras, you may also want to consider monitoring your garage, driveway, and outdoor patio.
2. Choose the right type of camera
Once you have identified the areas that need monitoring, you need to choose the right type of camera for each location. There are several types of security cameras available, including wired and wireless cameras, indoor and outdoor cameras, and dome and bullet cameras. You should consider the location, lighting conditions, and the level of security required to choose the right type of camera.
3. Place the cameras at the right height
Place your security cameras at a height where it is difficult for an intruder to tamper with them. High angles will also make it easier to capture a person's face. It is best to place them at eye level, roughly five to six feet off the ground.
4. Install the cameras out of reach
Make sure you install your security cameras out of reach from potential intruders. A burglar may try to disable your cameras by covering them with spray paint or hooding them. Make sure the cameras are installed in a location inaccessible to intruders.
5. Make sure the cameras are weatherproof
If you are installing cameras on the exterior of your home, you need to ensure that they are weatherproof. Outdoor cameras are exposed to harsh weather conditions, and if they are not weather resistant, they may not function correctly.
6. Connect the cameras to your router
After installing the cameras, you need to connect them to your router to access the live stream of video. Depending on the type of camera and the manufacturer, the set-up process may differ. Make sure you follow the instructions provided by the manufacturer to ensure you set up the cameras correctly.
7. Position the cameras for maximum coverage
Position the cameras in a way that will maximize their coverage. You need to make sure that the cameras are pointing at the areas that need monitoring. You should position the cameras in such a way that they cover as much ground as possible.
8. Test the cameras before leaving your home
Before you leave your home, test the camera feeds to ensure they are working correctly. It is best to do this from a remote location to ensure you can access the feeds from anywhere. Check the video quality, motion detection, and other settings to verify they are working correctly.
In conclusion, installing security cameras is an effective way to improve the safety and security of your home. However, it is essential to make sure that you set up the cameras correctly and position them in the right locations to maximize their performance. These tips will help you set up your security cameras and arrange their positions.